Espesifikasyon pwodwi yo
| Kategori | Spesifikasyon / Range |
|---|---|
| Gwosè tiyo | SCH: 40 - 160; OD: 1/2 "a 24"; Longè: 6 – 12 m |
| Pwosesis Faktori | ERW, san pwoblèm, fabrike, soude |
| Tiyo soude fini | Klere, poli, glas, recuit |
| Teknik tiyo ERW | Precision woule, frèt fòme, cho fòme |
| Tès | À, chimik, mekanik, PMI |
| Fòm tiyo soude | Wonn, kare, oval, rektangilè |
| Dokimantasyon | Rapò Laboratwa Apwouve NABL, Rapò Tès Materyèl kri |
| Anbalaj | Bwat an bwa, vlope jarèt, koutim, bann Steel Bundled |
| Fen tiyo | Bizote, Plain |
| Pwopriyete Fizik | Dansite: 7.85 g / cm³; Pwen k ap fonn: 1112 degre F (600 degre); Tanperati sèvis maksimòm: 590 degre |
| Estanda | ASTM A335 |
| Karakteristik | Rezistans korozyon, tolerans, sifas fini |
Gwosè ASTM A335 P11 alyaj asye tiyo segondè presyon
| OD (mm) | WT (mm) |
|---|---|
| 219.08 | 23.012 |
| 168.28 | 14.27 |
| 141.30 | 6.55 |
| 114.30 | 13.492 |
| 101.60 | 3.05 |
| 88.90 | 11.132 |
| 73.03 | 3.05 |
| 60.33 | 8.742 |
| 48.26 | 2.77 |
| 42.16 | 6.352 |
| 33.40 | 2.77 |
| 26.67 | 3.91 |
| 21.34 | 2.11 |
| 17.15 | 3.20 |
| 13.72 | 1.65 |
Tablo orè tiyo
| Gwosè tiyo | OD | SCH |
|---|---|---|
| 1″ | 1.315 | 10 – 10S |
| 40 – 40S | ||
| 80 – 80S | ||
| 160 | ||
| xx | ||
| 2″ | 2.375 | 10 – 10S |
| 40 – 40S | ||
| 80 – 80S | ||
| 160 | ||
| xx | ||
| 3″ | 3.500 | 10 – 10S |
| 40 – 40S | ||
| 80 – 80S | ||
| 160 | ||
| xx | ||
| 4″ | 4.500 | 10 – 10S |
| 40 – 40S | ||
| 80 – 80S | ||
| 120 | ||
| 160 | ||
| xx | ||
| 5″ | 5.563 | 10 – 10S |
| 40 – 40S | ||
| 80 – 80S | ||
| 120 | ||
| 160 | ||
| xx |
A335 Gr P11 Materyèl ekivalan
| ASTM | BS | ASME | ABS | Klas ekivalan | NK | JIS | UNS |
|---|---|---|---|---|---|---|---|
| A335 P11 | 3604 P1 621 | SA335 P11 | ABS 11 | T11 | KSTPA 23 | STPA 23 | K11597 |
Tretman chalè ASTM P11 Round Tiyo
| Klas | Kalite | Tanperati (degre) |
|---|---|---|
| P11 | Izotèmal | |
| Tanperaman, nòmalize | 650 |
